No suitable device found (Picoscope 6000)

Post any questions you may have about our current range of oscilloscopes
Post Reply
Eider
Newbie
Posts: 0
Joined: Tue Jul 13, 2021 6:04 am

No suitable device found (Picoscope 6000)

Post by Eider »

We have two picoscopes one 6402C and the other 6403E. The 6402C is not detected by the PicoScope6 software, although the Windows device manager detects both when they are connected via USB to the PC.

Gerry
PICO STAFF
PICO STAFF
Posts: 1034
Joined: Mon Aug 11, 2014 11:14 am

Re: No suitable device found (Picoscope 6000)

Post by Gerry »

Hi Eider,

We apologise for the delay in answering your post (there has been a lot of other work that needed attention).

So, in the event that you are still looking for an answer to your question, could you send an email in to Support@picotech.com, as this would appear to be a question better handled through our Help Desk.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply