3 phase power measurement with 4824

Post discussions on applications you are writing
Post Reply
vivek ladva
Newbie
Posts: 0
Joined: Mon Feb 04, 2019 7:13 am

3 phase power measurement with 4824

Post by vivek ladva »

Hello Sir,

I want to measure three phase power measurement with pico 4824. I want to use it as altenate model of Fluke 435 series 2 power quality analyzer.
https://dam-assets.fluke.com/s3fs-publi ... NG_D_W.PDF

Please check the datasheet of fluke 435 series 2 above....i want all these mesurement with pico 4824 with adding math channel in picoscope 6....Mainly i want 3 phase power, Voltage , current , thd value & percentage of voltage & current, apparent power , transient, energy calculation...

Can we do all or some of these measurement with 4824? If yes then Please guide us for adding math channel in software.

Martyn
Site Admin
Site Admin
Posts: 3994
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 3 phase power measurement with 4824

Post by Martyn »

Can you please email the support team directly for assistance support@picotech.com
Martyn
Technical Support Manager

DwightG
Newbie
Posts: 0
Joined: Sat Feb 16, 2019 12:42 pm

Re: 3 phase power measurement with 4824

Post by DwightG »

Hi Vivek, how did you get on with this?

Thanks.

nema
Newbie
Posts: 0
Joined: Fri Mar 12, 2021 9:01 am

Re: 3 phase power measurement with 4824

Post by nema »

Hi Vivek,
Were you successful in measuring the power using 4824?
Thanks
Nema

hanane
Newbie
Posts: 0
Joined: Thu Apr 08, 2021 9:28 am

Re: 3 phase power measurement with 4824

Post by hanane »

Hi Nema, DwightG, Vivek and Martyn,

I am working on some new options to develop on the 4824. Do you have some work done on this and can we patch them?

Thank you

Gerry
PICO STAFF
PICO STAFF
Posts: 953
Joined: Mon Aug 11, 2014 11:14 am

Re: 3 phase power measurement with 4824

Post by Gerry »

Hi Everyone,

We are trying to cover as much as we can both on the forum, and on our help desk. However, unfortunately, the working from home 'new normal' seems to have created a lot more users making use of the opportunity to resolve some outstanding issues, experiment with ideas, or just learn some things, on PicoScopes and Loggers. This means that we are having to prioritise 'getting to respond to more people' over 'working on more detailed projects', of which creating Math Channels for 3-phase power measurement applications is more of a project than an answer. So please bear with us while we circle back around to it in the near future.

Regards,

Gerry
Gerry
Technical Specialist

DwightG
Newbie
Posts: 0
Joined: Sat Feb 16, 2019 12:42 pm

Re: 3 phase power measurement with 4824

Post by DwightG »

hanane wrote:
Fri Apr 09, 2021 8:25 am
Hi Nema, DwightG, Vivek and Martyn,

I am working on some new options to develop on the 4824. Do you have some work done on this and can we patch them?

Thank you
Hi Hanane, I was just asking out of curiosity. I actually have recently purchased use a 4444 which I intend to use for all sorts regarding 3 phase power.

bennog
Advanced User
Advanced User
Posts: 82
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: 3 phase power measurement with 4824

Post by bennog »

the 4444 has only 4 channels for good power quality analyze you need at least 6 channels preferred 7 if you want to analyze the null wire also.

with the 4444 you can do max 2 ch at the same time and no null analyze.

Advantage of the 4444 is the probes are powered from the scope and not from battery's.

Benno

Post Reply