PicoVNA Vector Network Analyzer Toolbox

Post your MATLAB discussions here
Post Reply
NeilH
PICO STAFF
PICO STAFF
Posts: 148
Joined: Tue Jul 18, 2017 8:28 am

PicoVNA Vector Network Analyzer Toolbox

Post by NeilH » Tue Feb 13, 2018 3:30 pm

Hi,

A new toolbox has been uploaded to the MATLAB Central File Exchange pages - the PicoVNA Vector Network Analyzer Toolbox

Currently the toolbox is only available on 32-bit versions of MATLAB, 2015b is recommended.

For users of MATLAB 2014b and later the toolbox can be installed using the add-on manager, removing the need to copy the files from the zip files.

Any Users downloading the zip file will need to add the root folder and sub-folders to the MATLAB path.

Help documentation is also provided via Help -> Documentation in MATLAB, under Supplemental Software.
Neil
Technical Support Engineer

Volker
Newbie
Posts: 0
Joined: Thu Feb 28, 2019 11:59 am

Re: PicoVNA Vector Network Analyzer Toolbox

Post by Volker » Sun Mar 03, 2019 9:23 am

Seams to be unusable. Actual versions of Matlab are only 64 bit. Latest version that can be used is 2015b. Actual version is 2018b. When will you support the 64bit Versions of Matlab ?

Martyn
Site Admin
Site Admin
Posts: 3723
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PicoVNA Vector Network Analyzer Toolbox

Post by Martyn » Sun Mar 03, 2019 2:58 pm

We have just released a version that will allow control from 64bit versions of Matlab. You can find it on our downloads page https://www.picotech.com/downloads
Martyn
Technical Support Manager

Volker
Newbie
Posts: 0
Joined: Thu Feb 28, 2019 11:59 am

Re: PicoVNA Vector Network Analyzer Toolbox

Post by Volker » Sun Mar 03, 2019 7:45 pm

Sounds great.

So you mean that the Version 2.11.0.16 enables actual Matlab Version to interface with it ?
It would be nice to read this in the release notes and also on GitHub.

Martyn
Site Admin
Site Admin
Posts: 3723
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PicoVNA Vector Network Analyzer Toolbox

Post by Martyn » Mon Mar 04, 2019 6:45 am

If you install Version 2.11.0.16 , or future versions, you can use 32 or 64 bit MATLAB or other development tools to control the PicoVNA 106.

We will be removing the references to the 32bit limitation from the documentation and GitHub in due course.
Martyn
Technical Support Manager

Volker
Newbie
Posts: 0
Joined: Thu Feb 28, 2019 11:59 am

Re: PicoVNA Vector Network Analyzer Toolbox

Post by Volker » Tue Mar 05, 2019 6:52 am

good and fast service.

I have checked with Matlab 2018b and communication is working.

Post Reply