PICO_NOT_RESPONDING

Post your LabVIEW discussions here
Post Reply
spflanze
User
User
Posts: 4
Joined: Wed Jul 11, 2018 11:36 pm

PICO_NOT_RESPONDING

Post by spflanze » Fri Oct 19, 2018 4:16 am

I have a 3205D Oscilloscope. When I run:
PicoScope3000aExampleStreaming.vi
I get the error message:
Error 5007 occurred at ps3000aOpenUnit
Possible reason(s):
PICO_NOT_RESPONDING
So what are possible reasons for function ps3000aOpenUnit() to be unable to get a response from the 3205D?

My OS is Windows 7
LabVIEW version is 2017

Martyn
Site Admin
Site Admin
Posts: 3714
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PICO_NOT_RESPONDING

Post by Martyn » Mon Oct 22, 2018 12:44 pm

This could occur if you have not correctly stopped / closed the unit before trying to re open it.
Martyn
Technical Support Manager

spflanze
User
User
Posts: 4
Joined: Wed Jul 11, 2018 11:36 pm

Re: PICO_NOT_RESPONDING

Post by spflanze » Mon Oct 22, 2018 10:34 pm

The example VI worked after a computer reboot. This VI does execute PicoScope3000aClose.vi unconditionally when stopped using the red lettered STOP button. Maybe the VI was not properly stopped by using the window close icon, or the stop sign button.

Prior to computer reboot I tried power cycling the 3205D's power. This power cycling had no effect.

Martyn
Site Admin
Site Admin
Posts: 3714
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PICO_NOT_RESPONDING

Post by Martyn » Tue Oct 23, 2018 7:43 am

Unplugging the USB connector should drop any connections.
Martyn
Technical Support Manager

Post Reply