Low output voltage AWG Picoscope 3203D

Post any questions you may have about our current range of oscilloscopes
Post Reply
Posts: 0
Joined: Wed May 03, 2017 7:37 am

Low output voltage AWG Picoscope 3203D

Post by MalcolmCaemmerer » Wed May 03, 2017 9:01 am


I'm also showing a low voltage from the signal generator. The goal was to generate a 200µs pulse from 0V to 1V. I used an amplitude of 1V and offset of 1V but I'm only showing an output of about 200mV as shown.
(245.78 KiB) Downloaded 208 times
I've attached the pssettings file that I'm using with a 3203D.
I also found that when I set the amplitude to 2V without an offset, that I show the expected output of 2V.

Thanks for your help,

(113.68 KiB) Downloaded 275 times

Post Reply