Mso screen update

Which product is right for your exact requirements
Post Reply
Leonvs
Newbie
Posts: 1
Joined: Fri Sep 03, 2021 7:49 am

Mso screen update

Post by Leonvs »

Currently I am using a Logicport usb logic analyzer. What I like is the live screen update of this analyzer. Most logic analyzers capture anD only allow looking at the data afterwards. How is this with the 5444D MSO? While not triggered, is the current signal state shown on the screen and updated?

Gerry
PICO STAFF
PICO STAFF
Posts: 1034
Joined: Mon Aug 11, 2014 11:14 am

Re: Mso screen update

Post by Gerry »

Hi Leonvs,

We have many triggering Modes within our PicoScope 6 software.

If you set the Trigger to None, then you will just see the live data in real-time with no synchronization of any kind. If you set it to Auto, then the Scope will perform a capture every 2 seconds. If you set it to Repeat Trigger, then the display will update automatically every time there is a condition on the Trigger Channel. or Channels that matches the Trigger setup.

Regards,

Gerry
Gerry
Technical Specialist

bennog
Advanced User
Advanced User
Posts: 100
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Mso screen update

Post by bennog »

You forgot streaming mode witch also show live data.

Benno

Post Reply