Environment by using IP

Post Reply
John_Alfred

Environment by using IP

Post by John_Alfred » Sun Jun 20, 2010 6:52 am

Dear all,

We installed Environment application R5.21.5-32 bits on a PC which has a direct connection through COM1 to a logger and we can monitor all readings. This PC has an IP address such as 192.168.200.200.

We can see the aforementioned PC IP address 192.168.200.200 on the PCs connected to the network. So, we installed client Environment R5.21.5-32 bits on another PC connected to the same network. We configured this PC through Settings-Configuration-Change-Advance and selected Equipment then the following:- "Connection: IP Network", "IP Server: RJR-Console.corp.com.ua" and "IP Port: 1051".

Once we run Environment client on remote PC, we get error message "WARNING: Logger not found Server RJR-Console.corp.com.ua port 1051"

Please assist and advice
Top
ziko
Advanced User
Advanced User
Posts: 1705
Joined: Fri Dec 01, 2006 10:03 am
Location: St Neots

Re: Environment by using IP

Post by ziko » Tue Jul 13, 2010 1:02 pm

Have you tried typing in the ip address instead? Also have you made sure that the firewall allows your software on both ends to work?
Ziko

Technical Specialist
Top
Post Reply

Return to “Hardware”