TA125 compensation

Post any questions you may have about our current range of oscilloscopes
Post Reply
Posts: 0
Joined: Wed Oct 27, 2021 3:35 am

TA125 compensation

Post by PicoChico »

from the literature: "Pico oscilloscope probes are HF compensated at the factory and do not require adjustment"

https://www.picotech.com/library/applic ... pe-probes/

the TA131 has a box next to the BNC connector that I presume is where the HF compensation is locked in at the factory, because that's where other brands have their HF adjustment.

the TA125 has no such box. is it not compensated? does it not need to be compensated? i imagine the compensation would have to change depending on what you connect the banana plugs to, so i'm confused.

Post Reply