Automate picoscope 6

Post any questions you may have about our current range of oscilloscopes
Post Reply
hanane
Newbie
Posts: 0
Joined: Thu Apr 08, 2021 9:28 am

Automate picoscope 6

Post by hanane »

Hello,

I have to automate picoscope 4824. To do this I have to use the macro files with the API already given. Do you have an example of macro such as scaling or calculating climb time please.

Thank you

hanane
Newbie
Posts: 0
Joined: Thu Apr 08, 2021 9:28 am

macro

Post by hanane »

Hello;

I would like to know if there was the possibility of choosing which measurement one wishes to carry out and to give its value directly in the dashboard. When I do macro recording to calculate the maximim for example, it gives me a code that I will write to you below. However, he does not suggest that I choose the measure (maximum, minimum ...). Do you know how I can do this? Also the value is displayed on the oscilloscope but not on the code directly Do you think I can display this?

Thank you

code:

True
Run.Pressed=True
Measurement.Add.Click

Gerry
PICO STAFF
PICO STAFF
Posts: 1009
Joined: Mon Aug 11, 2014 11:14 am

Re: Automate picoscope 6

Post by Gerry »

Hi hanane,

I apologise for the delay in answering, I have been on annual leave.

I would suggest that you look at the following Forum post, which answers your question: topic40358.html?&p=143430&hilit=Automation#p143430.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply