Protocol decoder displaying graphic where there is no signal

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
nurber
Active User
Active User
Posts: 10
Joined: Fri Mar 24, 2017 6:05 pm

Protocol decoder displaying graphic where there is no signal

Post by nurber »

Hi. The attached screenshot shows a capture with decoder set to "All Buffers" which will occasionally serial decode ( red ) areas where there is no signal ( transceiver has not yet turned on ). Sorry for the cropped image, but this forum doesn't allow me sane size attachments ( i.e. 455KB ) as communicated in another thread. I was able to attach a screenshot of that error message though :)
Attachments
Screenshot (35).png
Screenshot (34).png

bennog
Advanced User
Advanced User
Posts: 78
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: Protocol decoder displaying graphic where there is no signal

Post by bennog »

can you post a .psdata file or a link to dropbox google drive etc to a .psdata file.

Benno

Post Reply