GUI Refresh rate depends on Time/Dev in Win10, witch is really annoying if you want to do sub Hz mesurement.

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
Benjamin
Newbie
Posts: 0
Joined: Sun Sep 20, 2020 11:57 am

GUI Refresh rate depends on Time/Dev in Win10, witch is really annoying if you want to do sub Hz mesurement.

Post by Benjamin »

I have to do some measurement of really slow frequencies so i need a very slow Time/div rate. The problem is that the GUI of the Picoscope 6 only refresh after a full frame of data. So if i have the slowest Time/div with 5000s per div i have to wait for hours until a click on a button is recognized. That's Awfull. Maybe the Gui should be independent in another thread than the communication with the scope.

bennog
Advanced User
Advanced User
Posts: 71
Joined: Mon Nov 26, 2012 9:16 am
Location: Netherlands

Re: GUI Refresh rate depends on Time/Dev in Win10, witch is really annoying if you want to do sub Hz mesurement.

Post by bennog »

Are you using the scope in streaming mode with this slow timebase ?

Tested this with my 3403D scope and I can not reproduce your problem.

Benno

Post Reply