Problem with decoding CAN frame in PicoScope 6

Forum for discussing PicoScope version 6 (non-automotive version)
Post Reply
manjchana
Newbie
Posts: 0
Joined: Mon Sep 14, 2020 12:49 pm

Problem with decoding CAN frame in PicoScope 6

Post by manjchana »

Hi!

I have a MCP2515 board hooked up to an Arduino which is transmitting data to a Raspberry Pi connected to a MCP2515. The RaspberryPi is able to see and dump the data successfully using candump, but when I probe the bus, including the SPI on the Arduino, PicoScope is not able to decode the frame data... Screenshow below

https://drive.google.com/file/d/13giHiH ... v1IHs/view Link to Google Drive screenshot

Can someone help me what I need to change in PicoScope to get the decode to work correctly? I am led to believe the frame must be OK if it is dumped without any issues on Linux

Thanks,
Manj

Martyn
Site Admin
Site Admin
Posts: 3872
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Problem with decoding CAN frame in PicoScope 6

Post by Martyn »

The link is protected.

Can you post the psdata file here or send it to support@picotech.com
Martyn
Technical Support Manager

Post Reply