2104 broken

Post any questions you may have about our current range of oscilloscopes
Post Reply
pficheux
Newbie
Posts: 0
Joined: Wed Jan 22, 2020 4:32 pm

2104 broken

Post by pficheux » Wed Jan 22, 2020 4:36 pm

Hi,

When removing the yellow plug from my Pico 2104, I disconnected the white wire (should be the signal wire).

How to reconnect (solder) it to the PCB ?

Thx
Attachments
IMG_9330.JPG

Gerry
PICO STAFF
PICO STAFF
Posts: 557
Joined: Mon Aug 11, 2014 11:14 am

Re: 2104 broken

Post by Gerry » Thu Jan 23, 2020 11:03 am

Hi pficheux,

Could you contact our helpdesk (support@picotech.com) where one of our technical specialists will be able to help you.

Regards,

Gerry
Gerry
Technical Specialist

pficheux
Newbie
Posts: 0
Joined: Wed Jan 22, 2020 4:32 pm

Re: 2104 broken

Post by pficheux » Thu Jan 23, 2020 1:36 pm

Hi Gerry,

Helpdesk proposed to send the device but it should be possible to solder it by myself (where to connect the white wire...).

regards

Martyn
Site Admin
Site Admin
Posts: 3760
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 2104 broken

Post by Martyn » Fri Jan 24, 2020 6:25 am

Can you see the other end of the broken white wire on the PCB ? Looks like there may be some glue holding it there.
Martyn
Technical Support Manager

pficheux
Newbie
Posts: 0
Joined: Wed Jan 22, 2020 4:32 pm

Re: 2104 broken

Post by pficheux » Sun Jan 26, 2020 12:55 pm

I don't see anything but I assume you have the tech doc and schematics at Picotech :-)

Martyn
Site Admin
Site Admin
Posts: 3760
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: 2104 broken

Post by Martyn » Sun Jan 26, 2020 8:45 pm

Can you see the notch in the PCB at the top of the picture with what looks like clear glue holding a white wire?
Martyn
Technical Support Manager

pficheux
Newbie
Posts: 0
Joined: Wed Jan 22, 2020 4:32 pm

Re: 2104 broken

Post by pficheux » Tue Feb 18, 2020 4:26 pm

Hi,

I didn't see any picture but problem is fixed, was very easy :-)

regards
Attachments
oscillo.png

pficheux
Newbie
Posts: 0
Joined: Wed Jan 22, 2020 4:32 pm

Re: 2104 broken

Post by pficheux » Tue Feb 18, 2020 4:29 pm

On the road again :-)

Post Reply