Picoscope Oscilloscope with Labview

Post any questions you may have about our current range of oscilloscopes
Post Reply
Posts: 0
Joined: Thu Dec 05, 2019 4:12 pm

Picoscope Oscilloscope with Labview

Post by tomjericho »

is it possible to use a Picoscope Oscilloscope as a Measurement device with Labview. I have seen, that there is a possibility of using them with Labview. But can they output the analog voltage, that they measure to other VIs? I need a Measurement device with a sampling rate of at least 3MS/s in Order to receive the Counts of a Servo-Motor-Encoder.

I hope someone can help me.
If you have any other suggestions on how to solve this, I would be very greatful.

Thanks in advance.

Post Reply