Hi
I am a newby and have installed logger version 6.1.13 and am using USB TC-08 with type K Them.
I am using windows 10 and it is updated.
When I open logger it shows TC -08 and in RH side channel 1 with temp of probe. the record button is red and the TC red light is pulsing.
When i click on Graph text show "waiting for data ... " and then nothing happens. I wait and wait !!!!!!!!
Please can someone help.
I have contacted Pico via Email and chat and have done what they suggested.
I have removed All programs etc from computer and re-installed software 3 times .
Attached file show screen shot
Thanks in Advance
Evan Thomas
Picologger version 6.1.13
-
- Newbie
- Posts: 0
- Joined: Thu Oct 31, 2019 3:05 am
Picologger version 6.1.13
- Attachments
-
- SCREEN SNAP OF PICO LOGGER VERSION 6.docx
- (61.33 KiB) Downloaded 120 times
Re: Picologger version 6.1.13
Have you pressed the red record button on the top bar, this will flash when it is actually recording data.
You will then get asked questions about your recording, continuous, fixed time and stop, fixed time over writing data.
You will then get asked questions about your recording, continuous, fixed time and stop, fixed time over writing data.
Martyn
Technical Support Manager
Technical Support Manager