Picolog help

Forum for discussing PicoLog
Post Reply
Anya
Newbie
Posts: 0
Joined: Tue Oct 15, 2019 12:53 am

Picolog help

Post by Anya » Tue Oct 15, 2019 1:03 am

Hi,
I've been running a TC-08 Thermocouple data logger using PLW recorder 5.25.3. Today, my colleague minimised the screen and we could not re-open the recorder until we restarted the computer. We were unable to stop recording until we shut down the computer. Clicking the recorder icon, only open the player software???

We then installed a newer version of the software Picolog 6.1.12. This took a bit of getting used to after using the 5.25.3 version. We had trouble saving the data. When stopped recording, we pressed the save button, but only the graphs saved. We really need to be able to save the data file too and could not find a way to do this.

Any help / work around for either of the above issues would be greatly appreciated.

Thank you.

NeilH
PICO STAFF
PICO STAFF
Posts: 148
Joined: Tue Jul 18, 2017 8:28 am

Re: Picolog help

Post by NeilH » Thu Oct 17, 2019 10:39 am

Hi

In PicoLog 6 have you set up the table before saving? What file format are you saving to from PiocLog 6?

Neil
Neil
Technical Support Engineer

Post Reply