Picolog 6.1.9 Maths channel sample interval

Forum for discussing PicoLog
Post Reply
turbine_logs
Newbie
Posts: 0
Joined: Sat May 18, 2019 11:50 am

Picolog 6.1.9 Maths channel sample interval

Post by turbine_logs » Sat May 18, 2019 12:28 pm

I expect I've missed something in the transition from v5 to v6, but the Maths Channel do not appear to allow millisecond sample intervals - the minimum interval seems to be 1 second ?
Also, decimal point place seem to be global, in v5 I think it could be set differently for each channel ?

Gerry
PICO STAFF
PICO STAFF
Posts: 441
Joined: Mon Aug 11, 2014 11:14 am

Re: Picolog 6.1.9 Maths channel sample interval

Post by Gerry » Wed May 29, 2019 11:04 am

Hi turbine_logs,

No you haven't missed anything, 1 second was the limit of the timing precision of the Math Channels in PicoLog 6.1.9 & 6.1.10, however, this will change in the next release, which is imminent.

You are also correct that the amplitude precision could be set individually in PicoScope 5 but currently only set globally in PicoScope 6. I am in the process of getting this raised with our development team.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply