ps4000aMaximumValue/ps4000aMinimumValue results

Post your C and C++ discussions here
Post Reply
hinxx
Newbie
Posts: 0
Joined: Mon May 13, 2019 12:45 pm

ps4000aMaximumValue/ps4000aMinimumValue results

Post by hinxx » Fri May 17, 2019 12:06 pm

What does the value returned by these two functions stand for? IOW, what could it is useful for?
I seem to be getting the same values for any voltage range I set; minimum -32 767, maximum +32 767 that is.

Martyn
Site Admin
Site Admin
Posts: 3609
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: ps4000aMaximumValue/ps4000aMinimumValue results

Post by Martyn » Mon May 20, 2019 8:22 am

These will return the Maximum and Minimum ADC value for the current scope setup. There are different devices supported by this driver, and some will return different values depending on setup, but not all.
Martyn
Technical Support Manager

Post Reply