TA375 probe pin to pcb adapter

Having problems ? let us know the details here
Post Reply
kushal
Newbie
Posts: 1
Joined: Thu Apr 25, 2019 10:30 am

TA375 probe pin to pcb adapter

Post by kushal » Thu Apr 25, 2019 10:36 am

Hi,
I am looking for TA375 probe pin to pcb adapter.
Our application is to couple the noise signal (which has to be measured by a picoscope) from PCB to picoscope.
We have a BNC to BNC cable, but we are not sure of the signal integrity. Therefore we are looking for option to connect picoscope probe directly to the PCB through the adapter.
Please suggest us some suitable pcb adapters which we can use with our PCB.

Regards,
Kushal Banerjee

Gerry
PICO STAFF
PICO STAFF
Posts: 441
Joined: Mon Aug 11, 2014 11:14 am

Re: TA375 probe pin to pcb adapter

Post by Gerry » Wed May 01, 2019 2:20 pm

Hi Kushal,

What would be on the PCB, would it be power supply components (could the board be a high current board), highly sensitive low voltage components, high frequency/wide bandwidth components, etc)?

Regards,

Gerry
Gerry
Technical Specialist

Post Reply