No error, but examples do nothing

Post your LabVIEW discussions here
Post Reply
malu
Newbie
Posts: 0
Joined: Wed Apr 24, 2019 9:19 am

No error, but examples do nothing

Post by malu » Wed Apr 24, 2019 11:12 am

Hi,

I am using the PicoScope 5244B. I tried to start the examples PS5000a but only the PicoScope5000aExampleBlockMSO.vi shows an effect. By running this VI the Pico blinks green and you see something in the graph. But the picture do not change if i change the input of the Pico. If I run the other Examples nothing happens. I use Windows 10 and LabView 2018. What is wrong?

Thank You!

Martyn
Site Admin
Site Admin
Posts: 3609
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: No error, but examples do nothing

Post by Martyn » Thu May 09, 2019 8:51 am

What signal are you putting into the scope ?
What values are you running the vi's with (Voltage Range, Timebase, Trigger) ?
Martyn
Technical Support Manager

Post Reply