data logger with python

Post discussions on projects you are working on
Post Reply
TobiPT
Newbie
Posts: 0
Joined: Tue Apr 16, 2019 8:26 am

data logger with python

Post by TobiPT » Tue Apr 16, 2019 11:50 am

For my application I need a python script which records analog data continously over a long time (>10 min) with the highest available sample rate (1-10 MHz). Data analysis will be done offline. So I just want to stream the data from the Picoscope to the PC.

I have a Picoscope 2204A and I am unsing python 3 (Anaconda distribution). I did not find any working and suitable examples on the Picotech website or on Github. I also failed to write a script by myself following the programmers guide. Either non-helping error messages (error 1h or error 3h) appeared or the script ran without doing anything (callback functions not executed).

I assumed that my application is a rather basic application and thus I got confused not to find any working example somewhere. Is a data looger as I explained possible with the hardware I have? If so, could you give me some hints how to implement it or preferably a working example.

Many thanks in advance.

Martyn
Site Admin
Site Admin
Posts: 3690
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: data logger with python

Post by Martyn » Thu May 09, 2019 8:40 am

We are currently working to provide streaming examples for Python but have nothing at present. For further advice please contact the support team directly support@picotech.com with your code and they can advise on potential issues
Martyn
Technical Support Manager

Post Reply