Channel Setup for TA167 Current Probe

Having problems ? let us know the details here
Post Reply
pdavitt
User
User
Posts: 9
Joined: Sun Mar 24, 2019 11:10 pm

Channel Setup for TA167 Current Probe

Post by pdavitt »

I have a Pico TA167 Current Probe. When I setup the Channel I do not find this probe in the "standard" probe list. Is one of the listed probes compatible with the TA167? If not, could you please assist with setup parameters for the TA167. Or, is it just best to select 1x or 10x depending on the measurement range I select on the probe?

Thanks,
Pat

Gerry
PICO STAFF
PICO STAFF
Posts: 1053
Joined: Mon Aug 11, 2014 11:14 am

Re: Channel Setup for TA167 Current Probe

Post by Gerry »

Hi pdavitt,

I've created the custom Probes for both ranges of the current clamp below:

TA167 Current Clamp (2000 A range).psprobe
(1.29 KiB) Downloaded 528 times
TA167 Current Clamp (200 A range).psprobe
(1.29 KiB) Downloaded 544 times

Regards,

Gerry
Gerry
Technical Specialist

pdavitt
User
User
Posts: 9
Joined: Sun Mar 24, 2019 11:10 pm

Re: Channel Setup for TA167 Current Probe

Post by pdavitt »

Gerry,
Thanks for the custom probes, they are a big help. I hate to be a pain, but I also have a TA041. I am currently using the x10 or x100 system probes, depending on selected scale. Is that ok, or do I need a custom probe for the TA041?
Just trying to make sure I have everything setup correctly.

Pat

Gerry
PICO STAFF
PICO STAFF
Posts: 1053
Joined: Mon Aug 11, 2014 11:14 am

Re: Channel Setup for TA167 Current Probe

Post by Gerry »

Hi Pat,

That's O.K. The x10 and x100 probes in the drop down list will work fine.

Regards,

Gerry
Gerry
Technical Specialist

AmpsMan
User
User
Posts: 3
Joined: Thu Nov 25, 2021 6:10 pm

Re: Channel Setup for TA167 Current Probe

Post by AmpsMan »

I using PicoScope version: 7.0.86.9656

My TA018 20A/60A current clamp is listed under the Probes section, but not my TA167 200A/2000A clamp.

Can my TA167 probes be added please (not as custom probe)?

https://i.imgur.com/q48ogc8.png
Attachments
q48ogc8.png
q48ogc8.png (9.46 KiB) Viewed 3322 times

AmpsMan
User
User
Posts: 3
Joined: Thu Nov 25, 2021 6:10 pm

Re: Channel Setup for TA167 Current Probe

Post by AmpsMan »

Ah! Resolved my issue by installing PicoScope 7 AUTOMOTIVE

https://i.imgur.com/MQUun0D.png

Post Reply