Hi again from Lawrence (I just posted first post)

Come here to introduce yourself, who you are, and what you do
Post Reply
Lawrence
User
User
Posts: 2
Joined: Wed Feb 27, 2019 7:33 pm

Hi again from Lawrence (I just posted first post)

Post by Lawrence » Wed Feb 27, 2019 9:36 pm

This is an attachment to my earlier intro post.

I have attached a file from attempting to measure my house voltage (120 VAC, as I am in Canada)
I am using 20 VAC on the software, and have the probes set to 10x, yet it only shows less that 4 volts - it should be around 12 VAC. When I first connect the probe to the source, it reads "Channel Overrange" , then it shows a mych smaller voltage signal.
Can you please take a look and see why?
Attachments
20190227-0002.psdata
(16.01 KiB) Downloaded 37 times
20190223-0001.psdata
(10.5 KiB) Downloaded 30 times
20190227-0002.psdata
(16.01 KiB) Downloaded 40 times

Martyn
Site Admin
Site Admin
Posts: 3609
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Hi again from Lawrence (I just posted first post)

Post by Martyn » Thu Feb 28, 2019 6:28 am

Do not do this it is dangerous !!!!!!
Martyn
Technical Support Manager

Post Reply