SBC / NUC

Which product is right for your exact requirements
Post Reply
JCD
User
User
Posts: 4
Joined: Sat Dec 22, 2012 1:06 pm

SBC / NUC

Post by JCD » Fri Jan 25, 2019 8:18 pm

Hi,
I would like to replace my parallel port ADC-11/12 and buy a Picolog 1216.
The laptop with parallel port is getting old and unreliable and I want to replace it as well.
Preferably with a Single Board Computer or a NUC.
Is there any brand/type/flavor you would recommend or advise against?
A fanless sollution would be the nicest.
Cheers,
Jean

JCD
User
User
Posts: 4
Joined: Sat Dec 22, 2012 1:06 pm

Re: SBC / NUC

Post by JCD » Mon Feb 04, 2019 11:19 am

I can see here Picolog on Raspberry pi3 that support for Raspberry pi will be feature request for Picolog 6.
Is Picolog 6 meanwhile supported on Raspberri Pi?

Martyn
Site Admin
Site Admin
Posts: 3635
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: SBC / NUC

Post by Martyn » Mon Feb 04, 2019 11:41 am

It is not currently supported but is being actively looked into, I suggest emailing support@picotech.com to log your interest.
Martyn
Technical Support Manager

JCD
User
User
Posts: 4
Joined: Sat Dec 22, 2012 1:06 pm

Re: SBC / NUC

Post by JCD » Wed Feb 06, 2019 4:07 pm

Martyn wrote:
Mon Feb 04, 2019 11:41 am
It is not currently supported but is being actively looked into, I suggest emailing support@picotech.com to log your interest.
Just did it :wink:

JCD
User
User
Posts: 4
Joined: Sat Dec 22, 2012 1:06 pm

Re: SBC / NUC

Post by JCD » Thu Jun 13, 2019 7:34 pm

OK the newsletter told me that
New SDK supports Raspberry Pi
Great news for software developers: now you can use all current PicoScopes and PicoLog data loggers with the Raspberry Pi. We've added new armhf beta drivers to the Pico driver repository for Linux.
On the page https://www.picotech.com/downloads/linux is a lot of information that is not clear for me because I am not a programmer.

Can Picolog and Picoscope programs be installed on a Raspberry Pi?

Post Reply