SLOW to save / export

Forum for discussing PicoLog
Post Reply
michael.coke
Newbie
Posts: 0
Joined: Wed Jan 16, 2019 12:32 pm

SLOW to save / export

Post by michael.coke » Wed Jan 16, 2019 1:32 pm

I apologise if this has already been raised before, I have tried searching through the threads and could not find anything...

I have recently moved from PicoLog 5 to PicoLog 6. My question is about the time it takes to save / export data. When I click on the Export as CSV for instance, even one line of data at 70 bytes can take 10 minutes to save. Meanwhile my PicoLog monitor is grey'ed out. I am only running 4 channels, so this seems extra-ordinarily slow, and not very usable.

Is there a setting that I have missed, or need to change so that this save / export time is virtually instant?

Bit of background - running Windows 10 on a Networked Computer with PicoLog 6.1.8
With the TC-08 DataLogger. Two channels are mA, and two are type K sensors
I have looked for instructions, but the only manuals I can find are for the TC-08 software of Pico 5

Many thanks

M

Martyn
Site Admin
Site Admin
Posts: 3609
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: SLOW to save / export

Post by Martyn » Wed Jan 16, 2019 1:57 pm

Just tested an export and it was around 20 seconds for a 7MB file using the current version of the software.

Can you send in the .picolog file to support@pictech.com so that the team can take a look.
Martyn
Technical Support Manager

Post Reply