Monitoring of Mill Motor Rotor Currents

Which product is right for your exact requirements
Post Reply
JulioB
Newbie
Posts: 1
Joined: Sun Jan 13, 2019 6:49 pm

Monitoring of Mill Motor Rotor Currents

Post by JulioB » Sun Jan 13, 2019 7:03 pm

Dear Team,
I have a very important project in mind, I need monitoring Mill Motor Rotor Currents, the electric characteristic to consider is:
Current level: 3000 amps
Voltage level: to 600 VAC.
Frequency: to 2 kHz.
I need
- 4 analog channels for current measurements.
- 4 analog channels for voltage measurements.
- 10 Digital inputs.
I see that the model PicoScope 5442D MSO in better for my requirements.
But I can´t find of probe I need for current & voltage measurement.
Please your recommendations as soon as possible.
Best regards

Julio

Martyn
Site Admin
Site Admin
Posts: 3637
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: Monitoring of Mill Motor Rotor Currents

Post by Martyn » Mon Jan 14, 2019 8:37 am

Please check the product pages for the 5000 series where you will find suitable current probes and high voltage probes

If you need further assistance on the suitability please email the team at support@picotech.com
Martyn
Technical Support Manager

Post Reply