Measure USB3.0

Which product is right for your exact requirements
Post Reply
patwen
User
User
Posts: 2
Joined: Fri Nov 16, 2018 6:08 am

Measure USB3.0

Post by patwen » Fri Nov 16, 2018 6:13 am

We are developing USB3.0 devices and need to optimise USB 3.0 transfer, which scope is good enough for USB3.0 testing and measurement?

Many thanks. :D

Gerry
PICO STAFF
PICO STAFF
Posts: 441
Joined: Mon Aug 11, 2014 11:14 am

Re: Measure USB3.0

Post by Gerry » Fri Nov 16, 2018 10:32 am

Hi Patwen,

If the test and measurement you want to perform is in areas of signal integrity, signal injection, skew analysis, eye mask testing, etc, then we have a range of RF products that can do this very cost-effectively here: https://www.picotech.com/rf-products.

If you are referring to tasks related to serial decoding, and data analysis then we don't have anything capable of doing that at USB 3.0 transfer rates.

Regards,

Gerry
Gerry
Technical Specialist

patwen
User
User
Posts: 2
Joined: Fri Nov 16, 2018 6:08 am

Re: Measure USB3.0

Post by patwen » Sat Nov 17, 2018 1:39 am

We do need a scope (signal integrity, signal injection, skew analysis, eye mask testing) and no sure which one is sufficient for the test, can you give us some recommendation?

Gerry
PICO STAFF
PICO STAFF
Posts: 441
Joined: Mon Aug 11, 2014 11:14 am

Re: Measure USB3.0

Post by Gerry » Mon Nov 19, 2018 6:14 pm

Hi Patwen,

You can focus your attention on our Sampling Scope series here: https://www.picotech.com/oscilloscope/9 ... illoscopes, which are capable of performing those types of measurement on USB SuperSpeed connections. If you want specific details regarding these measurements, and how a specific model will best suit your requirements, you can contact our RF product support team via email to support@picotech.com, or by calling in to +44 1480 396395, and asking for technical support on RF products (although this is dependent upon the availability of members of our RF support team).

Regards,

Gerry
Gerry
Technical Specialist

Post Reply