CM3 Data Logger

Post any questions you may have about our current range of USB data loggers
Post Reply
ndingel
Newbie
Posts: 0
Joined: Tue Sep 04, 2018 6:02 pm

CM3 Data Logger

Post by ndingel » Tue Sep 04, 2018 6:07 pm

Morning,
I have been using the 3-channel data logger without any issues. This morning, I wasn't able to get the channels online. I show the logger connected. I use PicoLog 6 through the network. Picolog6 was able to find the logger but shows no channels connected. I use 3 amp clamps. I have disconnected the logger along with the clamps then reconnected. It stills show no channels. Thanks.

Martyn
Site Admin
Site Admin
Posts: 3635
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: CM3 Data Logger

Post by Martyn » Wed Sep 05, 2018 7:28 am

Can you send a .picolog file to support@picotech.com and the team can work through your issue with you.
Martyn
Technical Support Manager

Post Reply