USB cable

Post discussions on projects you are working on
Post Reply
hinovel
Newbie
Posts: 1
Joined: Wed Aug 15, 2018 1:34 pm

USB cable

Post by hinovel » Fri Aug 24, 2018 2:44 pm

When we press the enter key or wobble the USB picolog wire the results we're getting from our pressure transducer shift a lot. Is there anything we can do about this?
Also when the transducer is left still the picolog reading shifts gently downwards in voltage reading over time. I was wondering if this is common and if this will continue to drop as we leave it plugged in.
Attachments
usb wobble and shift down.PNG

Gerry
PICO STAFF
PICO STAFF
Posts: 494
Joined: Mon Aug 11, 2014 11:14 am

Re: USB cable

Post by Gerry » Wed Aug 29, 2018 9:24 am

Hi hinovel,

No, that is not common. Is sounds like you have a bad connection somewhere. If you email us at support@picotech.com and send us a photograph of how everything is connected up (with a diagram of the connections if it's not clear from the images), our helpdesk can help you resolve the issue.

Regards,

Gerry
Gerry
Technical Specialist

Post Reply