PicoVNA106

Post discussions on projects you are working on
Post Reply
pico_emil
Newbie
Posts: 0
Joined: Thu Aug 02, 2018 2:35 pm

PicoVNA106

Post by pico_emil » Thu Aug 02, 2018 2:46 pm

I'm trying to familiarize myself with the SW and calibration of the PicoVNA106
I use a propriatary CAL-Kit
I'm struggeling what I should enter in the CAL Kit Editor Loss[GOhm/s] field?
My kit is SMA with teflon filling, same is the THRU
Can I use the ideal Thru model ?
pico_emil

Martyn
Site Admin
Site Admin
Posts: 3713
Joined: Fri Jun 10, 2011 8:15 am
Location: St. Neots

Re: PicoVNA106

Post by Martyn » Fri Aug 03, 2018 10:14 am

If you email in to support@picotech.com the application specialist for the VNA106 will be able to assist you.
Martyn
Technical Support Manager

pico_emil
Newbie
Posts: 0
Joined: Thu Aug 02, 2018 2:35 pm

Re: PicoVNA106

Post by pico_emil » Fri Aug 03, 2018 11:24 am

many thanks I did so and awaiting response

Post Reply