Software trigger for channel A and AWG , 5244B

Post your MATLAB discussions here
Post Reply
ThongHuynh
Newbie
Posts: 0
Joined: Tue May 29, 2018 11:26 am

Software trigger for channel A and AWG , 5244B

Post by ThongHuynh » Wed May 30, 2018 12:52 pm

Hi, I want to use the AWG on a 5244B to generate shots of 2-cycles sinewave and record the output by channel A at the same time. How can I set the channel A to use the same trigger source with the AWG (Software control trigger)? (I dont like to use trigger on channel A nor external ones).

My application is using AWG to excite a transducer and receive reflexion on channel A. I want to measure the time to fly, therefore absolute time is important.

Hitesh
PICO STAFF
PICO STAFF
Posts: 2855
Joined: Tue May 31, 2011 3:43 pm
Location: St. Neots, Cambridgeshire

Re: Software trigger for channel A and AWG , 5244B

Post by Hitesh » Thu May 31, 2018 9:39 am

Hi ThongHuynh,

Please see this post.

Regards,
Hitesh

Software Dev. Engineer

Post Reply