Search found 957 matches

by Gerry
Fri Jun 18, 2021 3:48 pm
Forum: MATLAB
Topic: How to improve transfer speed on Rapid Block mode?
Replies: 1
Views: 86

Re: How to improve transfer speed on Rapid Block mode?

Hi Sairy,

Could you do the following;

1/ Could you tell us, in detail, the method that you used to determine this.
2/ Could you post the exact results that you found.

Regards,

Gerry
by Gerry
Fri Jun 18, 2021 3:30 pm
Forum: Getting Started
Topic: The real-time data collection was lost over time
Replies: 1
Views: 82

Re: The real-time data collection was lost over time

Hi yasu, The PT-104 has no onboard memory. PicoLog 6 polls the data logger for the converted data at the interval that is set for the sample interval (if it is too quick then you start getting the same values, if it is too slow them you start missing values). So, to narrow down the cause of what is ...
by Gerry
Fri Jun 18, 2021 3:08 pm
Forum: PicoScope 6 for Windows
Topic: Logic Triggering Using A Threshold and A Level
Replies: 1
Views: 21

Re: Logic Triggering Using A Threshold and A Level

Hi dfergenson, When you deactivated the trigger on Channel D, Channel A is firing and capturing D going low which is the start of the hold-off period. So A and D triggers are not being seen in your capture, even when you deactivate D, because the D trigger is 8ms away (i.e. the rising edge that you ...
by Gerry
Fri Jun 18, 2021 2:35 pm
Forum: Projects
Topic: Capture and compare using 2405A
Replies: 2
Views: 18

Re: Capture and compare using 2405A

-
by Gerry
Fri Jun 18, 2021 2:09 pm
Forum: PicoScope 6 for Windows
Topic: Amplifier Wattage/power Calculation
Replies: 4
Views: 2418

Re: Amplifier Wattage/power Calculation

Hi ColdPower, Sorry for the delayed response, we have been very busy on our help desk, so it's only now that I'm able to clear up some outstanding posts. The reason that the question from EasyStreet was left unanswered was because the answer would be very different depending upon what the motive beh...
by Gerry
Fri Jun 11, 2021 2:56 pm
Forum: USB PC Oscilloscopes
Topic: Import .csv
Replies: 1
Views: 82

Re: Import .csv

Hi ruckb,

There is no import function in any of our software (apart from importing csv files as custom waveforms for our SigGen/AWG), deliberately, to restrict the software use to our hardware.

Regards,

Gerry
by Gerry
Fri Jun 11, 2021 12:50 pm
Forum: Getting Started
Topic: Capture a dynamic time measurement between two different channels
Replies: 3
Views: 1082

Re: Capture a dynamic time measurement between two different channels

11/06/21 UPDATE A recent customer query has highlighted some information that needs to be added here. In the previous posts it was assumed that the measurements would be between square shaped pulses. Of course, it could be possible that these are rounded pulses (e.g. due to the filtering effect of t...
by Gerry
Tue Jun 08, 2021 7:50 pm
Forum: Pre-Sales Advice
Topic: Synchronous addition
Replies: 1
Views: 205

Re: Synchronous addition

Hi Kis, Our documentation refers to this as waveform averaging (as described here: https://www.picotech.com/library/oscilloscopes/waveform-averaging) which, as described, can be done across buffers of the same PicoScope Channel, by averaging each displayed sample position in PicoScope 6 using the Av...
by Gerry
Thu May 27, 2021 2:24 pm
Forum: PicoScope 6 for Windows
Topic: Math channels: boolean compare operators missing?
Replies: 2
Views: 494

Re: Math channels: boolean compare operators missing?

Hi BramPeeters, Unfortunately, there are no Boolean or conditional operators in PicoScope 6 Math Channels. However, Conditional operators are on the list of inclusions to be implemented for our new version of software (PicoScope 7). In the meantime, you may still be able to achieve your measurement ...
by Gerry
Wed May 26, 2021 11:04 am
Forum: Projects
Topic: How to genereate PWM by using AWG for Picoscope 2208B
Replies: 5
Views: 3428

Re: How to genereate PWM by using AWG for Picoscope 2208B

Hi Joe,

I'll log the feature request, but just be aware that your last comment is likely to be poignant regarding the outcome.

Regards,

Gerry
by Gerry
Wed May 26, 2021 10:17 am
Forum: USB PC Oscilloscopes
Topic: Feature request: Trigger on I2C address & data
Replies: 7
Views: 2920

Re: Feature request: Trigger on I2C address & data

Hi Joe,

Unfortunately, a decision has been made, and this is not likely to be implemented in our software anytime soon. We will, instead be implementing the mitigating features mentioned in my previous reply.

Regards,

Gerry
by Gerry
Wed May 26, 2021 9:04 am
Forum: Getting Started
Topic: DrDAQ + PicoLog6 Large spikes in Freq. Measurements (positive and negative)
Replies: 6
Views: 792

Re: DrDAQ + PicoLog6 Large spikes in Freq. Measurements (positive and negative)

Hi CaliGeek,

I have modified this response as we are looking into this further and will be responding shortly.

Regards,

Gerry
by Gerry
Fri May 21, 2021 11:38 am
Forum: PicoScope 6 for Windows
Topic: Measuring digigal signals on MSO
Replies: 2
Views: 384

Re: Measuring digigal signals on MSO

Hi Pev, No you're not, the answer is easy only if you're familiar with the tool (and the Digital Channels are not accessible in the Standard Measurements menu). So, you can use the Time rulers to measure the period of the digital waveform by clicking and dragging the small white squares (there are 2...
by Gerry
Fri May 21, 2021 10:19 am
Forum: PicoScope 6 for Windows
Topic: Trace intermittently freezes (most of it) when settings changed
Replies: 1
Views: 339

Re: Trace intermittently freezes (most of it) when settings changed

Hi Brett, What appears to be happening is that the usage is not changing because the processor is effectively not taking on any more processing (which is why the screen is freezing) while it deals with clearing the decks in what is currently being processed and working hard to do it (which is why th...